Clean bikes impress everyone with their shiny look. Definitely, it reveals your personality at a first impression. Never take it lightly as you are the owner of your dream bike. Either you are an Indonesian bike lover or from any other country, the fundamental of cleaning remains the same.
It is a must to keep your bike clean and ready to ride any time. Proper cleaning also increases your bike performance and you save your precious time.
Wait For Cool Down
Never spray the water on the hot engine of your bike. A sudden temperature difference can crack the engine block. Just wait to cool down your bike engine.
Get The Grim Off
The dusty particles and other foreign droplets on the road fade your bike’s color. You leave it for a number of days then it may affect your bike performance.
To clean it properly, you just require sponge and foam liquid. Scrub from your handlebars and move your scrub towards the rear wheel. Clean your bike front as well as rear fork along with the rear and front triangle. It is the place where most of the mud collects.
Keep in mind that never use pressure washer directly to the wheel hubs. It can damage your bike bearings.
Also read: Top 10 Upcoming Motorbikes in Indonesia 2025
Clean The Wheels And Brakes
Clean the brake calipers and brake pads using the same sponge. You can also use a brake cleaner. It will help you to remove oil and grease from brakes. For the wheels clean spokes, hubs, and tires.
If your bike tires are too muddy, then use a brush having hard plastic fibers. Just soak it in the soap and scrub it hard on the tires. It will clean your bike tires.
Dry Your Bike
Use a soft dry towel to dry your bike to avoid watery stains after your wash. Especially care should be taken where there are steel divisions. Dry them properly as they catch the rust easily.
Polish Your Bike
The last step is to polish your bike with a wax polish. It helps to resist corrosion and any negative impact of foreign particles. Also, keeps your bike flashing.
How to Wash a Motorbike?
A motorbike must undergo proper washing in order to maintain its looks as well as functionality. Below are good tips for washing your motorbike:
- Gather Supplies – Mild shampoo, microfiber cloth, bucket, sponge, degreaser, and chain cleaner.
- Rinse Off the Bike – Using low-pressure water, simply remove the loose dirt and grime.
- Apply Cleaner – Apply a cleaner specifically for motorcycles, or mild soap.
- Do a Gentle Scrubbing – With a soft sponge or cloth, wipe down the surface of the body and wheels.
- Take Care of the Chain – Use chain cleaner and a brush to remove dirt.
- Rinse Thoroughly – Ensure that no soap residue remains on the bike.
- Dry the Motorcycle – Air blower or microfiber cloth.
- Lubricate the Chain – To keep on performing smoothly, the chain must be lubricated.
Also read: Top motorbike brands in Indonesia
How Do You Clean a Motorbike in 5 Minutes?
If you are in a hurry, try out this quick clean routine:
- Waterless Cleaner – Spraying a no-rinse cleaner on the bike.
- Wipe Down with a Microfiber Cloth – Removing dirt and dust.
- Chain Cleaning – Quickly wipe and apply chain lubricant.
- Body Polish – Use motorcycle spray wax for shine.
- Check for Streaks – Buff up the remaining spots with a dry cloth.
What Is the Best Way to Wash/Clean a Motorbike?
The best way to wash a motorbike is with two buckets: one for soapy water and one for rinsing. Use a motorbike-specific cleaner and never pressure wash the bike. Finally, dry and wax it for protection.
Can I Use Car Soap on My Motorbike?
Yes, car soap can also be used on the motorbike, but make sure it has a mild and non-corrosive formula. That is to say, don’t use dishwashing liquids or any harsh detergent, as these will strip protective coatings off the bike.
Is WD-40 Good for Cleaning a Motorbike?
WD-40 works well to clean chains and remove grease but should not be used on brakes or painted surfaces. It will work wonders to degrease and to prevent oxidation once properly wiped off.
Also read: The 5 Best Electric Motorbikes of 2024 for Daily Riding in Indonesia
What to Avoid When Washing a Motorbike?
- High-pressure water can damage electronics and force water into bearings.
- Harsh detergents may strip wax or damage paint.
- Direct sunlight causes water spots.
- Not drying properly can keep moisture, which causes rust.
- Not cleaning or lubricating the whole chain leads to wear and tear.
Dos and Don’ts of Motorbike Cleaning
Dos | Don’ts |
---|---|
Use a microfiber cloth | Use abrasive scrubbers |
Rinse before scrubbing | Use high-pressure water |
Use mild, pH-balanced soap | Use dish soap or harsh chemicals |
Clean and lubricate the chain | Neglect the chain maintenance |
Dry thoroughly | Leave water residue |
Wax the bike for protection | Skip post-wash lubrication |
Motorbike Cleaning: Tips for Motorbike Washing
- Always wash your bike in the shade so that water does not spot.
- Keep separate cloths for various parts (wheels, body, chain) to avoid scratches.
- Make sure to rinse thoroughly to remove all soap residues.
- Dry with an air blower or microfiber towel.
- Frequent cleaning will prevent rust and maintain bike performance.
Enjoy the ride! Happy Journey!