Before analyzing the problem in your motorcycle cylinder head, it will be good to know about the Cylinder Head of your motorcycle and its function.
What is Cylinder Head?
Cylinder heads are installed to seal the top of engine cylinders and located on top of the engine block. It is the place where the combustion takes place and you may find shafts and valves working in coordination in Cylinder heads.
What Is The Function Of Cylindrical Head?
There are many passes in the cylinder heads which allow the air and fuel to flow inside the cylinder and permits the exhaust gases to flow out from the combustion chamber. It is also equipped with a leak-proof gasket which prevents water and oil to enter the combustion chamber. The most important function of the cylindrical head is to provide cooling by passing the coolant into the engine block.
How to analyze the disturbance in Cylinder Head of your Motorcycle?
When you feel more consumption of fuel to cover the respective distance then it may be the first sign of disturbance in the cylinder head of your motorcycle. It is the easiest way to find the initial cause of cylinder head damage. There are various other signs that will help you to find the disturbance in the cylinder head.
Overheating
Cylinder Head cracking is a common problem that develops due to excessive heat. It generates when the compression gases from the combustion chamber displace the coolant which results in overheating of cylinder head from a number of places. When this process continues then the cylinder head may have a deep crack.
Excessive Oil Consumption
Sometimes the valves get forced out of position which allows oil to enter the intake or exhaust ports which results in high oil consumption in your motorcycle.
Poor Fuel Economy
If the valves are not creating the right pressure in the combustion chamber then it may lead to poor fuel efficiency. It means you have to put more fuel in generating the respective amount of power.
What May Be The Possible Solutions Of Cylinder Head Damage?
- You may opt for a recasting procedure to fill the crakes in your cylinder head where the molten material gets poured to fill the gap. It will be something cheaper to install a new cylinder head.
- Align the valves to allow the recommended oil intake and exhaust ports. Your mechanic will help you in this respect
We also recommend that you bring your motorcycle for timely service as you will know upcoming disturbances in your motorbike. You can repair it in the initial stage which will save your money as well as you will ride a maintained motorcycle in Indonesia.